Disc brakes perform the most important task on your vehicle that is it ensures that you can stop when you want to. You may have a two wheeler, a four wheeler or even a massive heavy vehicle, but the fact remains that in all of these, you will probably find a disc brake for sure. There are two main types of brakes that are used in vehicles, the disc brakes and the drum brakes, but the disc brakes are way more popular due to its superior efficiency and powerful braking especially during the wet conditions.
To state in a very easy way, a disc brake consists of two pads that clasps a rotor, which is actually nothing but a rotating disc, connected to the wheels of the vehicle through an axle. When we press on the brakes, we are actually controlling the clasping power of the clamp. On pressing the brakes, the pads or clamps come together to stop the rotor from spinning and that in turn slows down and stops the vehicle ultimately.
Pull up on the emergency brake or just press on the brake pedal to use the disc brakes for stopping your car, but if you are riding a motorbike, then it may not be so easy. You would be required to press the right hand lever and the rear left foot lever together in a motorbike in order to stop it with more efficiency and also to prolong the life of the brakes due to less strain.
As with any other motor parts, you will need to maintain brakes as well, and mind you, the brakes are the most important part of your car that you should maintain well and check up on regularly. Check to make sure that the brake pads are thick enough as bare pads will cause the disc brake damage and you do not want that. Check to see if the brake fluid is up to its rim in the reservoir, if it is not then refill it to the rim as that will not only help your brake’s efficiency, but also increase the life of your brakes.
With the first signs of cracking or scarring, you should see a qualified professional for maintenance of your disc brakes because if you do not, and the disc brakes crack up, then they can not be repaired and must be totally replaced. Maintain them well and regularly to prolong the lives of your vehicle’s disc brakes.
Disc brakes were earlier made totally out of steel, but with the modern days upon us, there are disc brakes these days that have strategic hallowed out areas which allow the extra heat that is generated, to escape through them. This is actually a great innovation that has reduced the chances of warping of the brakes due to excessive heat generation and therefore increased the disc brake’s service period. As days pass, newer designs are arriving and will keep arriving, they will be targeting to get the brakes work more efficiently and also, last longer in the process.
Author Resource:-
Sam Otoner is an author writing about automotive related topics, and you are invited to visit his website covering number of aspects about disk brakes. http://www.autopartblog.com/
![[Valid RSS feed]](http://www.livelyinfoarticles.com/images/icon_Rss.png "XML Feed For RSS"){kind=icon}
Category Rss Feed
Print This Article
Add To Favorites
